China Categories
All Categories
MHMA402A1G Panasonic Minas AC Industrial Servo Motor 2000R/Min 4.0KW
Ask Latest Price
Brand Name:Panasonic
Model Number:MHMA402A1G
Certification:CE
Price:contact
Payment Terms:T/T, Western Union,paypal
Supply Ability:500
Delivery Time:3-5days
Company Data
Verified Supplier
Contact Person
Becky
Business Type:
Importer Exporter Trading Company Seller
Officials:
23E BlockB,Lushan Building，Chunfeng Road,Luohu District,Shenzhen,518001,China
Quality:
Quality Certifitation Available
Visit Website
Product Details
Company Profile
Product Details
MHMA402A1G Panasonic Minas AC Industrial Servo Motor 2000R/min 4.0KW
Details
| Brand | Panasonic |
| Model number | MHMA402A1G |
| Input | 30AC 200V 23.4A |
| Rated Rev | 2000R/min |
| Reated Output | 4.0kw |
| Rated FREQ | 133Hz |
Specifications
Item | Specifications | ||
|---|---|---|---|
Control input | (1) servo-ON input (2) Alarm clear input (3) Gain switch input (4) Positive direction drive inhibit input (5) Negative direction drive inhibit input (6) Forced alarm input (7) Inertia ratio switch input | ||
Control output | (1) Servo-alarm output (2) Servo-ready output (3) External brake off output (4) At-speed output (5) Torque in-limit output (6) Zero speed detection output (7) Warning output (8) Alarm clear attribute output (9) Servo on status output | ||
Position control | Control input | (1) Deviation counter clear input (2) Command pulse inhibit input (3) Command division/multiplication switch input (4) Anti-vibration switch input (5) Torque limit switch input (6) Control mode switch input | |
Control output | (1) In-position output (2) Position command ON/OFF output | ||
Pulse | Max. command pulse frequency | 500 kpps (Optocoupler interface), 8 Mpps (When using line receiver input multiplied by 4) | |
Input pulse signal format | Differential input. Selectable by parameter. ([1]Positive/Negative pulse [2]A/B quadrature [3]Pulse/Direction) | ||
Electronic gear | Applicable scaling ratio: 1/1000 times to 8000 times Any value of 1 - 2 30 can be set for both numerator (which corresponds to encoder resolution) and denominator (which corresponds to command pulse resolution per motor revolution), but the combination has to be within the range shown above. | ||
Smoothing filter | Primary delay filter or FIR type filter is adaptable to the command input | ||
Analog | Torque limit command input | Individual torque limit for both positive and negative direction is enabled. | |
Torque feed forward input | Analog voltage can be used as torque feed forward input. | ||
Two-degree-of-freedom control | Available | ||
Anti-vibration control | Available | ||
Load variation suppression function | Available | ||
Speed control | Control input | (1) Internal command velocity selection input (2) Speed zero clamp input (3) Velocity command sign input (4) Control mode switch input | |
Control output | (1) Speed coincidence output (2) Velocity command ON/OFF output | ||
Analog | Velocity command input | Velocity command input with analog voltage is possible. Scale setting and command polarity vary depending on parameters. (6 V/Rated rotational speed: Default) | |
Torque limit command input | Individual torque limit for both positive and negative direction is enabled. | ||
Torque feed forward input | Analog voltage can be used as torque feed forward input. | ||
Internal velocity command | Switching the internal 8 speed is enabled by command input. | ||
Soft-start/down function | Individual setup of acceleration and deceleration is enabled, with 0 s to 10 s/ 1000 r/min. Sigmoid acceleration/deceleration is also enabled. | ||
Speed zero clamp | Internal velocity command can be clamped to 0 with speed zero clamp input. | ||
Two-degree-of-freedom control | Available | ||
Torque control | Control input | Speed zero clamp input, torque command sign input, control mode switch input. | |
Control output | (1) Speed coincidence output (2) Speed in-limit output | ||
Analog | Torque command input | Torque command input with analog voltage is possible. Scale setting and command polarity vary depending on parameters. (3 V/rated torque Default) | |
Speed limit function | Speed limit value with parameter is enabled. | ||
Full-closed control | Control input | (1) Deviation counter clear input (2) Command pulse inhibit input (3) Command division/multiplication switch input (4) Anti-vibration switch input (5) Torque limit switch input | |
Control output | (1) In-position output (2) Position command ON/OFF output | ||
Pulse | Max. command pulse frequency | 500 kpps (Optocoupler interface), 8 Mpps (When using line receiver input multiplied by 4) | |
Input pulse signal format | Differential input. Selectable by parameter. ([1]Positive/Negative pulse [2]A/B quadrature [3]Pulse/Direction) | ||
Electronic gear | Applicable scaling ratio: 1/1000 times to 8000 times Any value of 1 - 2 30 can be set for both numerator (which corresponds to encoder resolution) and denominator (which corresponds to command pulse resolution per motor revolution), but the combination has to be within the range shown above. | ||
Smoothing filter | Primary delay filter or FIR type filter is adaptable to the command input | ||
Analog | Torque limit command input | Individual torque limit for both positive and negative direction is enabled. | |
Torque feed forward input | Analog voltage can be used as torque feed forward input. | ||
Setting range of external scale | 1/40 times to 1280 times Although ratio of the encoder pulse (numerator) and external scale pulse (denominator) can be arbitrarily set in the range of 1 to 2 23 for the numerator and in the range of 1 to 2 23 for the denominator, this product should be used within the aforementioned range. | ||
Two-degree-of-freedom control | Available | ||
Anti-vibration control | Available | ||
Common | Auto tuning | The load inertia is identified in real time by the driving state of the motor operating according to the command given by the controlling device and set up support software “PANATERM”. The gain is set automatically in accordance with the rigidity setting. | |
Division of encoder feedback pulse | Set up of any value is enabled (encoder pulses count is the max.). | ||
Protective function | Hard error | Over-voltage, under-voltage, over-speed, over-load, over-heat,
over-current and encoder error etc. | |
Soft error | Excess position deviation, command pulse division error, EEPROM error etc. | ||
Alarm data trace back | Tracing back of alarm data is available | ||
The following are some of the drive models, both new and used are
stocked:
| MSDA3A3A1A | MSDA5A3A1A | MSDA013A1A |
| MSDA023A1A | MSDA043A1A | MSDA083A1A |
| MDDA103A1A | MDDA153A1A | MDDA203A1A |
| MDDA253A1A | MDDA303A1A | MDDA353A1A |
| MSDA403A1A | MSDA503A1A | MSD023A1XXV |
| MSDA083A1XXV | MSD043A1X | MSDA043D1A |
| MQDA043A1A | MUDS043A1A | MUDS023A1A |
| MUDS083A1A | MUMS082A1E0S | MUDS083A1M |
| MUMA012P1T | MUMA022P1T | MUMA042P1T |
| MUMA042P1S | MUMA012P1S | MUMA022P1S |
| MUMS082P1S | MSDA043A1XXV | MSDA013A1XXV |
| MKDET1505P | MLDET2310P | MUMA082P1T |
| MLDET2510P | MKDET1310P | MUMS042A1AOS |
| MSM041A211 | MQMA042A1E | MSMA022P1A |
| MSM042P1B | MSM042AJB | MSM011P1N |
| MQMA022S2P | MSM012AJA | MSM012P1F |
| MDMA152S1C | MSM042AJA | MQMA012C2P |
| MSMA022A1B | MSM021DJE | MSD043A1X |
| MSD043A1XX | MSM042A1A | MSM5AZA1B |
| MUMS012C2U1S | MUMS012A1F0S | MSMZ082A1B |
| MSD013A1XX | MSM012A1A | MSMA012C1A |
| MSDA013D1A | MSMA5AZS1A | MQMA012P1B |
| MSMD042P1T | MUMS022A1B0S | MFM082A1C |
| MQMA042A1E | MSMA022C1A | MSMA022C1E |
Our advantage Products:
【Honeywell】Module DCS / PLC
【Emerson】DeltaV Module / Servo Motor
【ABB】Input Output Module
【AB】Module / Touch Screen
【Rosemount】Pressure and Temperature Transmitter
【Yokogawa】Pressure Transmitter
【Yaskawa】Servo Drive / Servo Motor
【Mitsubishi】Servo Drive / Servo Motor
【GE】IC69 Series PLC/ Fanuc Servo Motor and Drive
(Modicon,SMC,SICK,NORGREN,Siemens etc.)
Shenzhen Wisdomlong Technology CO.,LTD
Contact person:Suki
Email:wtl2502keji@163.com
Skype:wtl2502
Company website:www.wtltian.com
Tel:+86-13268302140
Company Profile
Shenzhen Wisdomlong Technology CO.,LTD
Shenzhen Wisdomlong Technology CO.,LTD Mainly engaged in automation parts, PLCS,DCS,sensors, relays,
dirves,encoder, servo drive,soft starter,touch
screen,instrument,process control,electric transmission and factory
automation aspects of the project design,software
programming,technical service and staff training. Our company
locats at the central of China,Shenzhen, Guangdong Province. With
rapid development, Wisdomlong serves fields of automation in global
markets, Our business covers five continents throughout the world
with the basic conviction of honest, the international management
of customer-centered concept and purpose of bringing convenience to
customers. We have confidence to bring our customers more
substantial profit with high-quality service and reasonable prices.
Choosing us,you will choose a sincere friend and reliable partner.
Please feel free to contact us if you are a global manufacturer of
high quality brand products who desires to enter the Chinese market
or who searches for a Chinese agent.We would like to create a
brilliant future with friends in domestic and overseas. All goods
sold have one year warranty.
The company with domestic and international numerous well-known
brands supplier to build have extremely good relations of
cooperation, in Japan, South Korea, southeast Asia, Africa, Europe
and the United States, and formed a stable and efficient supply
network. The agent and the products are widely used in machinery,
equipment manufacturing, electric power, metallurgy, petrochemical,
automobile manufacturing industry, paper making, chemical industry,
medicine and aerospace industries.
Our Main Brand:
MITSUBISHI
YASKAWA
PANASONIC
GE FANUC
EMERSON
FISHER-ROSEMOUNT
HONEYWEL
ABB
AB
SHNEIDER MODICON
SIEMENS
................
Send your message to this supplier
You May Like
IN STOCK Mitsubishi Servo Motor HC-RFS103 / HC-RFS153 AC Industrial Motor 1kw
Emerson - Motors-AC Servo MHM-490-CONS-0000 ServoMotors-AC Servo manufactured by Control Techniques
Emerson Control Techniques MHM-8500-CONS-0000 Servo Motors, MH Series Servo Motors-AC Servo manufactured
Emerson MH Series Servo Motors-AC Servo manufactured Control Techniques MGE-4120-CBNS-0000 Servo Motors
EMERSON Control Techniques MG Servo Motor, 230VAC, 2" MGE-208-CONS-0000 SERVO MOTOR Encoder 230V
EMERSON Control Techniques, Nidec Motor Corp MGM-340-CONS-0000 2HP 6.5AMP 230VAC 3000RPM Servo Motor Encoder
Emerson Control Techniques MHE-455-CONS-0000 460VAC, 4" Frame MH Servo Motor 3000 RPM Max Speed, MS Connectors
Emerson Control Techniques NT 115/230VAC Servo Motors NTE-207-CBNS-0000 115/230VAC Nidec Motor Corp
Emerson Control Techniques NTE-212-TONS-0000 Servo Motor Encoder 5000 RPM Max Speed 230VAC
Emerson Control Techniques NT 115/230VAC Servo Motors NTE-207-LBNS-0000 115/230VAC Nidec Motor Corp
Emerson Control Techniques NTM-355-CBNS-0000 Servo Motor Encoder 230 VAC
Inquiry Cart
0