
10 Million Operation Times Servo Boom Barrier Motor Parking Lot Barrier Gates
Quick details:
The DZ-138 servo barrier gate series, which manufactured by our
company, adopts international advanced technology, mechanical and
electrical integrated design. Planet gear drive, high torque,
un-blocked, oil tight, no noise, automatically Self-locked when
power off, with 10 million operation times. The motor uses the DC
24V permanent magnet synchronous motor (PMSM motor), apply to the
global voltage, high-speed operation and rapid response, frequent
positive &negative operation in 24 hours does not heat, speed
time can be adjusted based on the vehicle flow and arm length, safe
and reliable. The series servo barrier gate is free-debugging and
free-maintenance, achieve the fully automation and intelligentize,
and the barrier arm open/close is fast and smooth, easy to use and
safe.
Rated Volatge | AC90V~AC264V,DC24V,50/60HZ |
Speed Time | 0.3s,0.6s,0.9s,2s,4s,6s |
Motor Power | 50W,max 100W |
Boom Length | 2meter to 6meter(max) |
Working Temperature | -40℃~85℃ |
Housing Size | 342*312*959*2mm(L*W*H*TH) |
Lifetime | >10 million times or 10 years |
MTTR | <0.5hour |
MTBF | >5 million times |
Protection Grade | IP68 |
Remote Controll Distance | ≤100 meter |
Motor Speed | 3000 r/min |
Relative Humidity | ≤90% |
Running Noise | <50dB |
Net Weight | 42.6KG |
Application | Parking Lots, Toll Gates, Goods Yards, RailwayCrossings,Commercial Premises,Apartment Block Access |
Functions and Features
1. Gate automatically open when power off, no clutch design, no need human intervention. When power on,
gate automatically reset, restore to the gate closing state, truly unattended, fire safety standards. If special
requirement, manual operation is required when power off, operating arm open and close manually also can
be realized by setting up control board DIP switch, which ensure that the system can be used at any time.
2. The use of Single Compression Balance Spring device, good regulation, no noise, indefatigable, not easy to break, safe and reliable.
3. A variety of input and output modes can be selected, normally open normally closed are optional.
4. Arm opening angle can be adjusted from 60 to 90 degrees, 10 degrees resolution, suitable for eaves prominent place to install.
5. Closing speed can be adjusted.
6. Barrier gate up &down signal relay switch output.
7. Barrier gate running state: OK signal output indicating that the gate is working properly.
8. Barrier gate operation abnormal alarm signal output.
9. R&G Traffic light relay switch signal output.
10. External loop detector signal anti-smashing interface, infrared sensor signal anti-smashing interface.
11. Count mode interface.
12. Arm Open priority anti-smashing function. No matter the current gate in what state, the operator through the triple
push button, software or remote control to issue an open command, the gate will give priority to the implementation of the opening action.
13. Barrier with anti-collision protection function, when the vehicle hits the gate arm, arm can be swing out to avoid
damage to the vehicle, and barrier gate machine.
14. Delay closed selection function.
15. High-sensitivity arm auto reverse function (intensity can be adjusted).
16. Parking system interface.
17.RS485 or RS232 network communication control up &down interface (no need to install communication module)
18. Anti-collision alarm signal interface.
19. Adjustable speed port (from 0.9s to 10 s)
20. High-strength precision cast steel, industry moving parts beyond the industry quality
Package:
Packed in bubble wrap firstly, and then reinforced with carton for outer packing.
Service for free:
1. One year free service is supplied(not including the arm)
2. Lifetime charged service is supplied
3. Technical service is supplied
4. OEM: we can customized machine case, color, logo for you, which accroding to your detailed requirements.
5. Technical support and aftersales service, it is a long term relatioship between us.
6. Price can be negotiable when you have big order quantity.
Service for charging:
1. Broken by wrong installation
2. Broken by improper voltage
3. The surfaces of the barrier destroyed by wrong installation and usage
4. Overdue service items are out of our promise.
Q: Are you trading company or manufacturer ?
A: We are a professional barrier gate manufacturer.
Q: How long is your delivery time?
A: Generally it is 2-5 days if the goods are in stock. or it is 5-7
days if the goods are not in stock, it is according to quantity.
We can send it for you by DHL/Fedex/TNT/SEA/AIR or your
requirments.
Q: How about payment terms our company provide?
A: T/T or Western Union.
Q: Do you provide free samples ?
A:No,we don't provide free samples. The MOQ of our products is
1pcs.
Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd
![]() |