Frequency Controlled Two Roll Mill Machine , Ф8mm Output Dia 2 High Rolling Mill

Frequency Controlled Two Roll Mill Machine , Ф8mm Output Dia 2 High Rolling Mill

Feature

1. The unit is used for processing copper alloy rod for cold rolling. Copper alloy rod is rolled by cold rolling mill to improve mechanical property and remedy the limitation of casting. The producing capacity is 2.5tom per hour, it can roll the rod from 17mm to 8/6mm.

2. The difficult of solving these problems is :how to make sure each stand is sync when roll different material and different hole size.

3. The machine designed by us is each stand driven by separate frequency motor or servo motor, so each stand still is sync after changing the rolling pass of and rotation speed. Process roller can change the pass, and each rotation speed can be set on touch screen.thus, under the premise of meeting stand’s strength,two-roller cold rolling mill can roll different size of copper rod. Different material also. Like 17mm-8mm,or 14.4-8mm,or 12.5-6.8mm or 8-4mm. Its same like Germany’s.

The unit is used for copper rod cold rolling. Through cold rolling, the mechanical behavior can be raised and the defects from casting can be also fetched up. The producing capacity is 2.5ton / hour when roll from Φ17mm to Φ8mm.

Mechanical design uses advanced crafts and high-quality materials, such as roller; the appearance of the machine adopts German design,which has higher work efficiency than other similar products；Electrical parts assemble the imported parts from Japan, which have safe and reliable performance, high technological content; the whole production process is monitored by color touch screen with clear data displaying, easy operating and high automaticity. 2 high motive power frame copper rod rolling mill is beautiful, efficient and durable.

Main Parameter

2. Technical process

First, check the device to see if it works normal (including that roll wheel stands must be fill with butter per shift, the sanitary conditions of frame and each guide and so on); after ensuring the normal condition of the equipment and safety operation, turn on the power supply; wait for the console touch screen to enter into the normal working screen, then open the oil pump. After the oil pump starts working, lubricating oil flows into the 2 high motive power frame. for a moment, through the transparent oil return pipe the lubricating oil can be seen to come out from the oil return hole of the motive power frame. At this time, open the rolling mill operation ( as well as forward and reverse); and then open the emulsion pump, wait for emulsion to flow out from each cooling point of the 2 high frame and roll the copper rod; the rolling speed can not be too fast at the beginning of rolling copper rod, but it can be speed up to normal produce when copper rod comes out from rolling mill and penetrates into take-up machine and coil basket. after penetration take up and looping basket ,can increase speed. turn into normal production. When finish, turn off the rolling mill(take-up machine),emulsion pump,oil pump,main power in order.

some questions for this machine, maybe u are interested in

1. Is it very difficult that the roller of roll mill be changed ?

The roller of 3-roller rolling machine changed will waste many time.but the roller of 2-high rolling machine changed is very fast , just 20min.

2. Is it very difficult to operate the rolling machine ?

No.just need one person and the machine is very easy to be operated.

3. what’s the main different between rolling mill and extrusion machine?

Rolling mill belong to cold process,extrusion machine belong to hot process.

4. what about reducing machine and rolling machine?

It is a same machine,just different name.

jiaxing Jicheng Machinery Co., Ltd is established in 2000, and located in Jiaxing city of Zhejiang. Nearby Hangzhou, Suzhou, Ningbo and other cities, it is located in the center of shanghai-hangzhou and suzhou-hangzhou traffic trunk lines, whose traffic is extremely convenient. The company is a professional production of oxygen-free copper rod continuous casting machine , metal rolling machine, copper wire drawing machine and other equipment high-tech manufacture company. That own independent reach and development, production and sales team.Since its establishment, the company has been awarded many honorary titles, such as Jiaxing Technical Private Company, Zhejiang Small and Medium sized technical company and National High-tech enterprises.
Our product not only have good reputation and sales well at home, but also be exported to more than 40 countries and regions, such as Russia, Malaysia, India, Vietnam, North Korea, Egypt, Iran, Syria, Lebanon, Zambia, Uzbekistan and Turkmenistan.
Jiaxing Jicheng machinery Co., Ltd will continue to keep the service concept of quality priority, and the work concept of innovation and development. Keeping scientific management, professional employee team, rigorous attitude, plentiful on-site experience to provide you the better product and higher quality service.YOU AND JICHENG DESIGNING IMPROVING INNOVATING