
motor driven screw air compressor Unit 420cfm 145psi 75kw
We may provide all kinds of invert screw air compressor,the power from 5.5kw to 280kw,the air delivery from 0.6m³/min to 72m³/min,the working pressure from 0.5mpa to 1.3mpa,and with water cooling ,air cooling,belt drive or direct connecting.
Structure | Parameters | |
Capacity | 12 m3/h | |
Working Pressure | 10 bar | |
Rated Power | 75 KW | |
Airend | SKK | |
Drive Style | Coupling | |
Cooling System | Wind-Cooled | |
Suction | Temperature | ≤40 °C |
Pressure | Normal Pressure | |
Relative Humidity | ≤100% | |
Outlet Temperature | Ambient Air Temperature +10 °C | |
Capacity | 600 m3/min | |
Safety Valve Set Pressure | 11 bar | |
Lubricating Oil Brand | KAISHAN | |
Outlet Dimension | G2 | |
Sewage Outfall Dimension | G1/2 | |
Dimension | Length | 2440 mm |
Width | 1160mm | |
Hight | 1620 mm | |
Weight | 1900kg | |
Motor | Model | Y2 280 s-2 |
Speed | 2974 rpm | |
Rated Power | 75 kw | |
Service Factor | 1.15 | |
Safety Grade | IP54 | |
Insulation Grade | F | |
Starting Method | Direct Starting | |
Voltage | 380 V or 420V | |
Frequency | 50 Hz or 60 Hz | |
Rated Current | 133 An | |
Motor Weight | 510 kg | |
2. screw air compressor main spare parts configuration:
screw air compressor main spare parts configuration: | ||
Item | Parts | Brand |
1 | Air end | SKK(USA) |
2 | Intake Valve | Hoerbiger (Austria),Hongxing |
3 | Solenoid Valve | CEME (Italy),Hongxing |
4 | Temperature sensor | kaishan original |
5 | Pressure sensor | Huba original (from Switzerland) |
6 | Motor | Dongguan/Qingjiang Motor |
7 | Coupling | Germany KTR or kaishan |
8 | Thermostat Valve | Italy VMC |
9 | PLC | Schneider Electric(France),Siemens,Plot |
10 | Minimal Pressure Valve | Hoerbiger (Austria)/kaishan |
11 | Air filter element | Germany MANN /kaishan |
12 | Oil filter element | Germany MANN /kaishan |
13 | Oil and gas separator element | Germany MANN/kaishan |
14 | Bearing | Sweden SKF (Life 60000 hours) |
4. Specifications:
Model | Pressure | Capacity | Connection type | Power | Dimension | Weight |
(MPa/psi) | (m3/min/CFM) | Belt | (kw/hp) | (mm) | (kg) | |
LG-1.2/8 | 0.8/115 | 1.2/42 | 7.5/10 | 900×700×1040 | 350 | |
LG-1.0/10 | 1/145 | 1/35 | ||||
LG-0.8/13 | 1.3/190 | 0.8/28 | ||||
LG-1.7/8 | 0.8/115 | 1.7/60 | 11/15 | 1060*800*1230 | 500 | |
LG-1.5/10 | 1/145 | 1.5/53 | ||||
LG-1.2/13 | 1.3/190 | 1.2/42 | ||||
LG-2.4/8 | 0.8/115 | 2.4/84 | Belt | 15/20 | 550 | |
LG-2.2/10 | 1/145 | 2.2/77 | ||||
LG-1.7/13 | 1.3/190 | 1.7/60 | ||||
LG-3/8 | 0.8/115 | 3/105 | Direct | 18.5/25 | 1420*850*1110 | 600 |
LG-2.7/10 | 1/145 | 2.7/95 | Belt | 1080*880*1415 | 650 | |
LG-2.3/13 | 1.3/190 | 2.3/80 | ||||
LG-3.6/8 | 0.8/115 | 3.6/126 | Direct | 22/30 | 1420*850*1110 | 650 |
LG-3.2/10 | 1/145 | 3.2/112 | Belt | 1080*880*1415 | 700 | |
LG-2.7/13 | 1.3/190 | 2.7/95 | Belt | |||
LG-5/8 | 0.8/115 | 5/175 | Belt | 30/40 | 1300*1100*1650 | 1000 |
LG-4.5/10 | 1/145 | 4.5/158 | ||||
LG-3.7/13 | 1.3/190 | 3.7/130 | ||||
LG-6.2/8 | 0.8/115 | 6.2/217 | Direct | 37/50 | 1050 | |
LG-5.6/10 | 1/145 | 5.6/200 | Belt | |||
LG-4.8/13 | 1.3/190 | 4.8/170 | ||||
LG-7.5/8G | 0.8/115 | 7.5/263 | Direct | 45/60 | 1778*1000*1300 | 1100 |
LG-6.9/10 | 1/145 | 6.9/242 | Belt | 1300*1100*1650 | ||
LG-6.0/13 | 1.3/190 | 6.0/210 | ||||
LG-10.5/8G | 0.8/115 | 10/350 | Direct | 55/75 | 1820*1160*1550 | 1500 |
LG-8.7/10 | 1/145 | 8.7/305 | Belt | 1620×1230×1670 | ||
LG-7.5/13G | 1.3/190 | 7.5/263 | ||||
LG-13/8G | 0.8/115 | 13/455 | Direct | 75/100 | 2440×1160×1620 | 2080 |
LG-10/10G | 1/145 | 10/350 | ||||
LG-12/10G | 1/145 | 12/420 | ||||
LG-10/13 | 1.3/190 | 10/350 | ||||
LG-16/8G | 0.8/115 | 16/560 | Direct | 90/120 | 2560*1300*1620 | 2150 |
LG-14/10G | 1/145 | 148490 | ||||
LG-12/13G | 1.3/190 | 12/420 | ||||
LG-20/8G | 0.8/115 | 20/700 | Direct | 110/150 | 3000*1340/1710 | 3900 |
LG-16/10G | 1/145 | 16/560 | ||||
LG-13/13G | 1.3/190 | 13/435 | ||||
LG-22/8G | 0.8/115 | 22/770 | Direct | 132/180 | 3000*1340/1710 | 4000 |
LG-20/10G | 1/145 | 20/700 | ||||
LG-16/13G | 1.3/190 | 16/560 | ||||
LG-27/8G | 0.8/115 | 27/945 | Direct | 160/220 | 3000*1340/1710 | 4200 |
LG-23/10G | 1/145 | 23/805 | ||||
LG-20/13G | 1.3/190 | 20/700 | ||||
LG-30/8G | 0.8/115 | 30/1050 | Direct | 185/250 | 3250*1820*2000 | 4300 |
LG-21/13 | 1.3/190 | 21//750 | ||||
LG-35/8G | 0.8/115 | 35/1230 | Direct | 200/270 | 3250*1820*2000 | 4500 |
LG-30/10G | 1/145 | 30/1050 | ||||
LG-27/13G | 1.3/190 | 27/945 | ||||
LG-40/8G | 0.8/115 | 40/1400 | Direct | 220/293 | 3720*2220*2050 | 4800 |
LG-35/10G | 1/145 | 35/1230 | Direct | 250/340 | ||
LG-46/8G | 0.8/115 | 44/1540 | Direct | |||
LG-40/10G | 1/145 | 40/1400 | ||||
LG-59/8G | 0.8/115 | 59/2065 | Direct | 315/420 | 4000*2000*2100 | 5400 |
LG-46/10G | 1/145 | 46/1610 | ||||
LG--65/8G | 0.8/115 | 65/2275 | Direct | 355/473 | 5800 | |
LG-58/10G | 1/145 | 58/2030 | ||||
LG-70/8G | 0.8/115 | 70/2450 | Direct | 400/533 | 6000 | |
LG-72/8G | 0.8/115 | 75/2520 |
5. Competitive Advantage:
♦ Fully seal & double screw,dual shockproof,smooth
operation,can be installed anywhere.
♦ With a exquistie shape and compact structure and cover a small
area.
♦ Large displacement,stable pressure and high efficiency.
♦ Low exhause temperature (only 7 °C~10°C higher than the ambient
temperature)
♦ Safe,liable,smooth operation,little noise and long maintenance
cycle and using life.
♦ The intelligent control system completely satisfy the continuous
cooperation without man work
♦ Many screw air compressors operate together and start or shut
down automatically
according to the air amount,and no man-work is needed.
♦ It is more energy saving for a single compressor can adjust air
demand automatically according to the users' air amount(frequency
conversion type).
♦ The degree of tightness of the belt can be auto-matched with the
flexible belt. Through adjusting the tensility, the loss of the
pressure and efficiency can be reduced to the lowest point and
increase the time efficiency of pressing.
♦ Narrow belt has higher transmission power with efficency of about
98%.the structure can reduce internal heat and prevent aging. It
enjoy Longer service life and much lower stretch ability.
6.Tag:
Screw air compressor ,motor driven stationary screw air compressor
Hangzhou Kaishan Air Compressor Co., Ltd
Kaishan group is a state-level large scale
enterprise in China, which has been listed among the five
industries of Zhejiang Provincial government, the 958 Technology
Catching-up Plan and the key enterprises by Zhejiang provincial
government. The group is the civilized enterprise of provincial
level and contract abiding and trustworthy enterprise of state
level.
Currently, Kaishan group has 18 subordinate companies with over
4100 employees. It covers an area of over 430,000 m2 with the total
building complex area over 230,000 m2 and the total assets of the
group amounts to over 1.5 billion.
"Kaishan" trademark, together with its logo, is the first company
awarded with "Chinese renowned trademark" in the same trade and
Kaishan air compressor is among the first exempted by Chinese
government.
By the year of 2008, the total sales revenue of the group is 2.03
billion RMB, with 173 million RMB of profit, and USD10.69 million
worth of export goods. Kaishan group has been honored with "Special
Quzhou Mayoral Award" for the past consecutive eight years.
Kaishan group has a sophisticated national-wide retail network
supported by the high-quality customer service system. The nine
major series of Kaishan product spread from rock drilling unit,
screw air compressor to excavator, crawler drill etc, and
altogether 18 categories with over 800 individual products.
By far, Kaishan group is the largest rock drill manufacturer in the
world, and the largest air compressor manufacturer in China.
Exports are shipped to over 20 different nations and regions such
as United States, Germany, Japan, South Korea, Russia, African and
Latin American countries.
Kaishan group owns the best fine processing equipment over 1000
units. It has formed the machinery processing system with advanced
technology, top-rate equipments and structure integrity.
In recent years, Kaishan group sticks to the talent-employment
standard of Capable, Tough and Reliable and upholds the enterprise
spirit of Flexible, Efficient, and Confident. Focusing on
technology and industry innovation and centering product and market
restructuring, the group have already planned a "4211" development
strategy.
In 2005, cooperating with Xi'an Jiaotong University compressor
research institute and interlinking with the state 863 project, the
group successfully developed a high-tech product: screw air
compressor's core part : screw rotors . It marks the end of relying
on import this unit from overseas only in China. The success has
made Kaishan group the first in the industry which owns the
intellectual property, core technique and competitive advantage
among large-scale equipment manufacturers in China. In 2006,
Kaishan group was awarded with a second-class outstanding technique
invention award by Chinese government for this technology.
Upon the success, we are currently trying to list one of our
subordinate company: Zhejiang Kaishan General Machinery Co., Ltd to
the share market. Also, we are hoping to develop Kaishan group into
a large-scale and diversified manufacturer with its own patent core
technique and core competitiveness. We are striving to rejuvenate
our national industry and develop as the pillar of Chinese air
compressor industry in a yearning for greater contribution to
China's harmonious society construction and national equipment
manufacturing industry development.